How to maintain the mold

1. The cutting edge of the mold must be ground after long-term use, and the cutting edge surface must be demagnetized after grinding, and it cannot be magnetic, otherwise, it is easy to block material.
2 Spring and other elastic parts in the use of the spring are the most vulnerable to damage, usually fracture and deformation phenomenon. The way to take this is to replace, in the replacement, the process must pay attention to the specifications and models of the spring, the specifications and models of the spring through the color, outer diameter, and length three to confirm, only in the case of the same three can be replaced.
3. The punch is easy to break, bend and chew during the use of the mold, and the punch sleeve is generally chewed. Punch and punch sleeve damage are generally replaced with the same specification parts. The parameters of the punch mainly include the size of the working part, the size of the installation part, the length size, etc.
4. Tighten the parts, and check whether the fastening parts are loose and damaged, and the way to take this is to replace the parts with the same specifications.
5. Press parts such as press plate, good force glue, etc., discharge parts such as stripper plate, pneumatic jacking, etc. During maintenance, check the relationship between the parts of each part and whether there is damage, repair the damaged part, check whether there is a gas leakage phenomenon, and take measures for the specific situation. Replace the air pipe if it is damaged
Regular mold maintenance and maintenance, on the one hand, can extend the life of the mold, and on the other hand, can reduce the degree of damage to the mold.